Business case

Impact on increased knowledge and understanding as a result of the case study

Increase Awareness

Contribution to social parity, or impact on social disparity

Equality

Reduced use of virgin materials and/or an increase of the use of secondary and bio-based materials

Reduce Material Consumption (SDG12)

Minimise waste through diversion: Instead of sending waste to landfill, it is redirected into other industrial processes for handling, treatment, recycling, recovery, or reuse in various forms. 

Minimise waste through design: At the outset of a process of project, plan and design such that there is zero waste or minimal waste during production, use, and at end of life. 

Minimise Waste (SDG12)

Producing agricultural products and processing them into food and beverageproducts for consumption

Agri/Food

Collecting waste from households and businesses by means of refuse bins, wheeled bins, containers, etc., and providing treatment, incineration, materials recovery and reclamation, and disposal of hazardous and non-hazardous waste

Waste Management

Producing basic and specialty chemicals, inks, agricultural chemical such as fertilisers and pesticides, plastics including packaging, and rubber

Chemical and Plastic

Utilise waste streams as a source of secondary resources and recover waste for reuse and recycling

Use waste as a resource

Designing to reduce waste during production and use

Design out waste

Cycle strategies aim to cycle and reuse materials at their highest value: they maximise the volume of secondary materials re-entering the economy, ultimately minimising the need for virgin material inputs and therefore also narrowing flows. Of course, virgin materials will always be needed to a degree: all materials degrade and can’t be cycled infinitely, use energy, and require blending with virgin materials to maintain strength and functionality.

Cycle

Archetypes

CE Materials

Impacts

small_climate-4803653_640.jpg

thumbnail_climate-4803653_640.jpg

climate-4803653_640.jpg

Industries

small_coast-wind-turbine-sea-sky.jpg

thumbnail_coast-wind-turbine-sea-sky.jpg

coast-wind-turbine-sea-sky.jpg

Materials

A framework of policy instruments that enabled and encourage the transition to the circular economy

Policy Instruments

medium_image-20160922-22514-1aqaw5j.jpg

small_image-20160922-22514-1aqaw5j.jpg

thumbnail_image-20160922-22514-1aqaw5j.jpg

image-20160922-22514-1aqaw5j.jpg

A framework of policy instruments that enable and stimulate the transition to the circular economy

Nace Sectors

The principles of a circular economy concern designing out waste, regenerating ecosystems and keeping items in use. Decoupling the economy from material flows—improving the rate of resource productivity faster than the economic growth rate—is also a consistent guide. By evolving with the growing number of applications of circular economy principles, and consolidating these strategies across thematic areas, Circle Economy’s Key Elements Framework (KE) renders the elements of the circular economy salient and serves as a basis to derive contextual strategies and interventions. 


The Framework consists of:
- Core Elements: Activities directly handling product or material flows; and uniquely,
- Enabling Elements: those that remove obstacles for core actors.


Key elements of the circular economy

large_photo-1515534238346-fb9ae3e399d0.jpg

medium_photo-1515534238346-fb9ae3e399d0.jpg

small_photo-1515534238346-fb9ae3e399d0.jpg

thumbnail_photo-1515534238346-fb9ae3e399d0.jpg

photo-1515534238346-fb9ae3e399d0.jpg

Circle Economy's framework of strategies and activities that define the circular economy

Topics

Urban Opportunities

Whilst no two countries are the same, there are still obvious similarities between some of them, with discernible development patterns and parallels in evidence. Common problems and shared solutions help place unique country identities and individual issues in context.

Whilst this classification is far from clear-cut and exhibits some overlap, it does underline how the discourse on transitioning to a circular economy needs to account for both differences and commonalities, if we are to arrive at a more strategic and instructive analysis. It also allows to highlight a set of key themes that are likely to be central to the countries that fall under the respective profiles. 

Country profiles (Build, Grow, Shift)

thumbnail_bgsimage 14.png

bgsimage 14.png

A framework to distinguish between different country profiles and their circular transition needs.

Browse case studies by type of implementing stakeholder.

Implementing stakeholders

It is 2050.  Full systems change has taken place. This wouldn’t have been possible without the immediate action and radical steps taken from 2020 onwards. Many targets had to be identified in the early 2020s and achieved by 2030 to ensure that the 2050 goal happened in full. A sense of urgency, turbo stakeholder collaboration, supportive government regulation and clear, data driven targets enabled the mindsets and systems change needed to transform to a fully circular textiles ecosystem.

A circular economics model underpins what we have created. It reflects and supports a living organism made up of makers, users and restorers, interacting across vibrant and interconnected networks. Checks and balances, alongside transparency and accountability, ensure a healthy system. Financial, environmental, and social metrics have the purpose of serving communities and the planet. There is shared ownership of profit and loss – across all three metrics – throughout the value chain.

This is what we’ve achieved over the last 30 years:

WCTD Themes

thumbnail_wctd.jpg

wctd.jpg

The Circular City Actions Framework provides urban changemakers with five complementary strategies they can use to start working towards a more circular system. 

The framework is action-based to provide users with concrete strategic directions and showcase the desired outcomes of each strategy. 
The framework consists of five complementary **strategies**, under which **sub-strategies** provide further detail. Finally, each sub-strategy consists of a diversity of tangible **solutions** which are framed in relation to key thematic areas. 

Note: solutions are currently focused on:
- 🍏 **Food systems**
- 🏢  **Built environment**
- 👕📱  **Consumer goods**
- ⚡ **Energy Systems**
- 🚌 **Mobility Systems**
- 💧 **Water Systems**

More thematic areas are coming soon...

'Click through each of the five strategy cards below to explore the framework and circular economy case studies in more depth!'



This framework was developed in collaboration with ICLEI, Metabolic and Ellen MacArthur Foundation with support from the MAVA Foundation. Read more about it [here]( https://circulars.iclei.org/action-framework/). 



Circular City Actions Framework

large_Circular-City-Actions-Framework-infographic-scaled_gray background.jpeg

medium_Circular-City-Actions-Framework-infographic-scaled_gray background.jpeg

small_Circular-City-Actions-Framework-infographic-scaled_gray background.jpeg

thumbnail_Circular-City-Actions-Framework-infographic-scaled_gray background.jpeg

Circular-City-Actions-Framework-infographic-scaled_gray background.jpeg

An action-based framework for local governments working towards circular cities

Thematic Areas

City Stakeholders

Test Framework

Challenges

Based on the ongoing ISO standardisation process, a taxonomy has been defined under which to cluster indicators to measure circularity. 

ISO Taxonomy

![Screen Shot 2024-10-21 at 16.53.12.png](https://goldilocks-images.s3.eu-west-1.amazonaws.com/Screen_Shot_2024_10_21_at_16_53_12_12858da6aa.png)

Based on the work of [Bocken et al. (2016)](https://www.researchgate.net/publication/309699661_Product_design_and_business_model_strategies_for_a_circular_economy), the Four Flows Framework serves as a simple framework for managing resource flows in a circular economy by using less (Narrow), using for longer (Slow), using again (Cycle), and using clean, regenerative materials and energy (Regenerate).

These different principles of circular economy can be applied to our socioeconomic metabolism: we can design stocks like buildings, infrastructure, machinery, and vehicles to be rich resource mines for the future, and design manufactured goods and consumables to be cycled and made regenerative. Furthermore, the focus must also centre on getting more value out of fewer materials. Achieving the aims of a circular economy—minimising material use, regenerating the Earth, and preventing material losses—can be done through these four key strategies mentioned above.

Source: Circle Economy. (2023). *[The circularity gap report 2023](https://www.circularity-gap.world/2023)* (p.22). Amsterdam: Circle Economy. 

Four Flows Framework

medium_Screen Shot 2024-10-21 at 16.53.12.png

small_Screen Shot 2024-10-21 at 16.53.12.png

thumbnail_Screen Shot 2024-10-21 at 16.53.12.png

Screen Shot 2024-10-21 at 16.53.12.png

  The Centre for Social Research and Development (CSRD) was established in 2008 under decision number 10/QD-LHH by the Thua Thien Hue Union for Science and Technology Association (HUSTA)
Learn More News  

8 December, 20219 November, 20216 November, 20211 November, 202125 October, 202122 October, 202121 October, 202119 October, 202116 October, 202115 October, 202114 October, 202112 October, 2021

Tuy Hoa

The Incubation Network sources, supports and scales innovative solutions that tackle plastic pollution. Together with their diverse network of key partners, they work to optimize land-based plastic waste management, and advance a circular economy in South and Southeast Asia.

The network is an initiative by The Circulate Initiative and SecondMuse.

blob

The Incubation Network

A Vietnamese civil society organization established in 2016 focusing on zero waste solutions, plastic waste, marine plastic, sustainable agriculture, and natural conservation.

GreenHub

<p>A Vietnamese civil society organization established in 2016, GreenHub focuses on zero waste solutions, plastic waste, marine plastic, sustainable agriculture, and natural conservation. GreenHub’s research and advocacy project aims to integrate women informal waste workers into formal provincial waste management and recycling chains.&nbsp;</p><p>The project conducts detailed research on the status of women informal waste workers, who account for around 98% of all informal waste workers across the waste supply chain in Tuy Hoa city, Phu Yen province. It maps, assesses and illustrates the specific role of women informal waste workers and how they contribute to recycling value chains, as well as their desires around social, economic, and political inclusion. Finally, it leverages GreenHub’s relationship with local political institutions to seek leadership, integration, financing, or capacity-building opportunities for women informal waste workers, based on the research findings.</p>