small_iclei.png

thumbnail_iclei.png

iclei.png

Circle Economy and ICLEI have partnered up to initiate the go to knowledge hub of case studies about the circular economy in cities. The Cities Collection is a repository of case studies that demonstrate the role of cities in the circular transition, and includes policies, business cases and research articles. Cases in the Collection flow into an ecosystem of digital products which support users in transitioning cities to circularity, for example [Ganbatte](https://ganbatte.world/cities/) and <a href="https://circulars.iclei.org/" target="_blank">ICLEI Circulars</a>, both part of the <a href="https://circulars.iclei.org/circle-lab-for-cities/" target = _blank">Circle Lab for Cities Programme.</a>

large_Circular-City-Actions-Framework-infographic-scaled_gray background.jpeg

medium_Circular-City-Actions-Framework-infographic-scaled_gray background.jpeg

small_Circular-City-Actions-Framework-infographic-scaled_gray background.jpeg

thumbnail_Circular-City-Actions-Framework-infographic-scaled_gray background.jpeg

Circular-City-Actions-Framework-infographic-scaled_gray background.jpeg

Circular Cities

large_eugene-kuznetsov-swmakc2l4EM-unsplash_2.jpeg

medium_eugene-kuznetsov-swmakc2l4EM-unsplash_2.jpeg

small_eugene-kuznetsov-swmakc2l4EM-unsplash_2.jpeg

thumbnail_eugene-kuznetsov-swmakc2l4EM-unsplash_2.jpeg

eugene-kuznetsov-swmakc2l4EM-unsplash_2.jpeg

Policy case

Impact on the health and happiness of human populations

Well-being

Reduced green house gas emissions released into the biosphere

Reduce Emissions (SDG13)

Reduced use and withdrawal of water and rate of recycling and reuse of water

Save Water (SDG6)

Contributing to the improvement of biodiversity including species diversity, total number of protected species, and ecosystem health

Biodiversity

Producing and gathering crop and animal products from land and water through farming, hunting, and fishing

Agriculture

Ensure renewable, reusable, non-toxic resources are utilised as materials and energy in an efficient way

Prioritise regenerative resources

Develop regenerative infrastructure

Includes measures that protect and enhance ecosystems and biodiversity both within and beyond city boundaries, as well as actions to restore degraded ecosystems.


Protect and restore local ecosystems

The food system nourishes populations and employs 50% of the global workforce, but:
- it currently drives a quarter of the overshoot on the climate change planetary boundary due to its greenhouse gas (GHG) production, 
- animal farming alone uses over one-quarter of all land, equivalent to the size of the Americas,
- nearly a quarter of freshwater resources are lost due to rampant food waste, and
- it is the single largest driver of biodiversity loss.

A circular food system must address the whole value chain, from production to consumption to waste management. The four key solutions for the food system are:
- Put healthier, satiating foods first: Prioritise satiating and healthy foods with a lower environmental impact—ideally shifting calories from meat, fish, and dairy towards cereals, fruits, vegetables, and nuts.
- Go local, seasonal, and organic: Prioritise the production and consumption of local, seasonal, and organic produce (sometimes in combination with GMO to reduce pests and disease loss on crops), which can lead to a significantly reduced need for chemical inputs, fuels, and processing services that contribute to environmental impacts.
- Mainstream regenerative agriculture: Scale up agricultural practices that regenerate ecosystems, recirculate nutrients and sequester carbon by design. 
- End avoidable food waste: Minimise food loss and valorise waste following the food waste hierarchy along the supply chain and at the consumer level through better management of transport and storage, more refrigeration and smart planning, and technology at the consumer and food service levels.



🍏 Food Systems

Communities

Governments

Regenerate strategies phase out hazardous or toxic materials and processes and substitute them with regenerative biomass resources. A circular economy aims to mimic natural cycles—by shifting to more regenerative farming practices, for example—while also maximising the share of circular biomass that enters the economy. Regeneration can happen both at the systems level (by designing regenerative processes) as well as at the product level (by switching synthetic to organic fertilisers, for example).

Regenerate

Impacts

small_climate-4803653_640.jpg

thumbnail_climate-4803653_640.jpg

climate-4803653_640.jpg

Industries

small_coast-wind-turbine-sea-sky.jpg

thumbnail_coast-wind-turbine-sea-sky.jpg

coast-wind-turbine-sea-sky.jpg

A framework of policy instruments that enabled and encourage the transition to the circular economy

Policy Instruments

medium_image-20160922-22514-1aqaw5j.jpg

small_image-20160922-22514-1aqaw5j.jpg

thumbnail_image-20160922-22514-1aqaw5j.jpg

image-20160922-22514-1aqaw5j.jpg

A framework of policy instruments that enable and stimulate the transition to the circular economy

The principles of a circular economy concern designing out waste, regenerating ecosystems and keeping items in use. Decoupling the economy from material flows—improving the rate of resource productivity faster than the economic growth rate—is also a consistent guide. By evolving with the growing number of applications of circular economy principles, and consolidating these strategies across thematic areas, Circle Economy’s Key Elements Framework (KE) renders the elements of the circular economy salient and serves as a basis to derive contextual strategies and interventions. 


The Framework consists of:
- Core Elements: Activities directly handling product or material flows; and uniquely,
- Enabling Elements: those that remove obstacles for core actors.


Key elements of the circular economy

large_photo-1515534238346-fb9ae3e399d0.jpg

medium_photo-1515534238346-fb9ae3e399d0.jpg

small_photo-1515534238346-fb9ae3e399d0.jpg

thumbnail_photo-1515534238346-fb9ae3e399d0.jpg

photo-1515534238346-fb9ae3e399d0.jpg

Circle Economy's framework of strategies and activities that define the circular economy

The Circular City Actions Framework provides urban changemakers with five complementary strategies they can use to start working towards a more circular system. 

The framework is action-based to provide users with concrete strategic directions and showcase the desired outcomes of each strategy. 
The framework consists of five complementary **strategies**, under which **sub-strategies** provide further detail. Finally, each sub-strategy consists of a diversity of tangible **solutions** which are framed in relation to key thematic areas. 

Note: solutions are currently focused on:
- 🍏 **Food systems**
- 🏢  **Built environment**
- 👕📱  **Consumer goods**
- ⚡ **Energy Systems**
- 🚌 **Mobility Systems**
- 💧 **Water Systems**

More thematic areas are coming soon...

'Click through each of the five strategy cards below to explore the framework and circular economy case studies in more depth!'



This framework was developed in collaboration with ICLEI, Metabolic and Ellen MacArthur Foundation with support from the MAVA Foundation. Read more about it [here]( https://circulars.iclei.org/action-framework/). 



Circular City Actions Framework

An action-based framework for local governments working towards circular cities

Thematic Areas

City Stakeholders

![Screen Shot 2024-10-21 at 16.53.12.png](https://goldilocks-images.s3.eu-west-1.amazonaws.com/Screen_Shot_2024_10_21_at_16_53_12_12858da6aa.png)

Based on the work of [Bocken et al. (2016)](https://www.researchgate.net/publication/309699661_Product_design_and_business_model_strategies_for_a_circular_economy), the Four Flows Framework serves as a simple framework for managing resource flows in a circular economy by using less (Narrow), using for longer (Slow), using again (Cycle), and using clean, regenerative materials and energy (Regenerate).

These different principles of circular economy can be applied to our socioeconomic metabolism: we can design stocks like buildings, infrastructure, machinery, and vehicles to be rich resource mines for the future, and design manufactured goods and consumables to be cycled and made regenerative. Furthermore, the focus must also centre on getting more value out of fewer materials. Achieving the aims of a circular economy—minimising material use, regenerating the Earth, and preventing material losses—can be done through these four key strategies mentioned above.

Source: Circle Economy. (2023). *[The circularity gap report 2023](https://www.circularity-gap.world/2023)* (p.22). Amsterdam: Circle Economy. 

Four Flows Framework

medium_Screen Shot 2024-10-21 at 16.53.12.png

small_Screen Shot 2024-10-21 at 16.53.12.png

thumbnail_Screen Shot 2024-10-21 at 16.53.12.png

Screen Shot 2024-10-21 at 16.53.12.png

large_brad-west-0G3Kj9L2JH0-unsplash.jpg

medium_brad-west-0G3Kj9L2JH0-unsplash.jpg

small_brad-west-0G3Kj9L2JH0-unsplash.jpg

thumbnail_brad-west-0G3Kj9L2JH0-unsplash.jpg

brad-west-0G3Kj9L2JH0-unsplash.jpg

Ann Arbor

large_blob

medium_blob

small_blob

thumbnail_blob

blob

Ann Arbor is a city in the U.S. state of Michigan and home to the University of Michigan. The city is included in the Greater Detroit Combined Statistical Area and the Great Lakes megalopolis, the most populated and largest megalopolis in North America.
The city's economy is significantly shaped by the university (about 30,000 workers) and is also centered on high technology, with several companies drawn to the area by the university's research and development infrastructure.

City of Ann Arbor

Ann Arbor residents voted to approve the city's Greenbelt Program in 2003. Since it was created, the program has protected over 5,716 acres of land. Greenbelt areas function as green infrastructure by improving water quality and protecting biodiversity.It has been estimated that the Greenbelt Program prevents around 150 US tons of total suspended solids, 4.5 US tons of nitrogen and 0.7 US tons of phosphorous from entering local waterways each year. By conserving contiguous woodland and wetland areas, it also protects ecosystem functionality and creates diverse habitats.

Ann Arbor Greenbelt Program

Direct and indirect reduction in economic costs

Cost Savings

Reduced use of fossil fuel energy sources and/or increased use of renewable energy

Reduce Energy Consumption

Producing building materials and finished and semi-finished building products for construction

Construction Materials and Products

Enacting measures that optimise water use

Water efficiency

Enacting measures that optimise energy use

Energy efficiency

Installing sensors to gather data from products and services to identify, enable and/or implement circular strategies (eg. effective resource use & logistics planning, circular business models & design)

Sensors, monitoring systems

Circular use of public-owned assets (land, buildings and equipment)

The built environment, including housing, commercial buildings, and the necessary infrastructure for mobility, is essential for our livelihoods, but:
- the extraction of minerals used to produce construction materials is responsible for a quarter of global land use change,
- approximately 40% of global GHG emissions can be attributed to buildings’ construction, use and demolition, and
- construction and demolition processes drive nearly one-third of all material consumption. 

Making the built environment more circular must prioritise a heavy reduction in material use—while also closing the loop on materials and bringing secondary and renewable material choices to the fore. Our four key solutions for the built environment are:
- Make the most of what already exists: Make the most of existing materials by reusing, repurposing, upgrading and renovating following circular approaches. Where new builds are needed, use secondary materials and be as efficient as possible with urban planning solutions that follow circular design principles so that buildings can be reused, repurposed, and easily disassembled in the future.
- Be as energy efficient as possible: From the design phase, utilise circular strategies to create material- and energy efficient buildings. Couple these designs with a rollout of clean energy solutions, and prioritise energy-efficient appliances and retrofitting. 
- Utilise secondary materials: Maximise the high-value reuse of buildings and components where possible. Ideally, enable the utilisation of construction and demolition outputs and ensure that as much of it as possible is recycled to avoid the need for virgin materials, such as sand and gravel.
- Prioritise circular materials and approaches: Transition to using renewable wood, timber or cross-laminated timber instead of steel and concrete, or move to other locally available materials. Utilise mainstream modular construction and prioritise lightweight frames and structures to reduce cement and steel use, as well as green roofs where possible.



🏢 Built Environment

Buildings house all production activities, and also are where people spend the majority of their time. Consequently ‘buildings’ consume  resources, namely energy and water, and produce large amounts of waste. 

The use phase of buildings represents the largest resource flows during their lifecycle. Optimised operations for different types of buildings—such as offices, industrial and commercial facilities or houses—can reduce energy, water and waste consumption, as well as operating costs, and enhance the wellbeing of users. 

Local governments can support Information and communication technology (ICT) innovation for the circular management of building operations for instance, by adopting new technologies, digital services and systems that can help with the monitoring and evaluation of (water and energy) efficiency. At the local level, policy can also set new building standards that can scale up net-zero waste, energy and water buildings. Then, the uptake of  ‘green contracts’—agreements that require the contractor to develop and implement a site management plan and favour certain types of resources—can also stimulate circular operations by legally ingraining circularity in the relationship between building owners, operators and users.


large_james-frewin-EfKJol09bMw-unsplash.jpg

medium_james-frewin-EfKJol09bMw-unsplash.jpg

small_james-frewin-EfKJol09bMw-unsplash.jpg

thumbnail_james-frewin-EfKJol09bMw-unsplash.jpg

james-frewin-EfKJol09bMw-unsplash.jpg

🏢⚡  Optimised facility management

The City of Ann Arbor has built its Justice Center following the Leadership in Energy and Evironmental Design (LEED) practices.

Optimised facility management of Ann Arbor's gold LEED certified Justice Center

small_Vortex (2022).JPG

thumbnail_Vortex (2022).JPG

Vortex (2022).JPG

This collection features a selection of case studies, based on the global *Circularity Gap Reports*, that can mitigate climate breakdown by reducing virgin material consumption, waste and greenhouse gas emissions. The latest **[Circularity Gap Report 2023](https://www.circularity-gap.world/2023#download)** reveals that the global economy is now only 7.2% circular and outlines how circular solutions across four sectors can bring global planetary boundaries back within safe limits. 

In the six years of the *Circularity Gap Report*, the global economy has extracted and used unprecedented amounts of materials. The first edition of the *Report *in 2018 found that global circularity was 9.1% and it has decreased every year since—leaving a Circularity Gap of over 90%. If this trend continues, we will have to find more and better solutions to combat the negative effects of climate change. This is why we have identified case studies from across the globe—based on the needs of society and planetary health—that serve as real-world examples of the circular economy in action.

Circle Economy is a not-for-profit organisation working to accelerate the circular transition. Through the *Circularity Gap Reporting Initiative*, our mission is to deliver an annual global Circularity Metric that measures the state of the world economy and identifies key levers to transition to global circularity. With nature as our guide, we work alongside cross-sector stakeholders from academia, businesses, NGOs and governments to provide a powerful combination of practical and scalable interventions that transform circular opportunities into realities. 


To learn more about these interventions to accelerate the circular transition, read the latest [Circularity Gap Report 2023](https://www.circularity-gap.world/2023#download), as well as previous editions of the global [Circularity Gap Reports](https://www.circularity-gap.world/global).

large_CGR 2023 Post #1 (Report Introduction).png

medium_CGR 2023 Post #1 (Report Introduction).png

small_CGR 2023 Post #1 (Report Introduction).png

thumbnail_CGR 2023 Post #1 (Report Introduction).png

CGR 2023 Post #1 (Report Introduction).png

Global Circularity Gap Report 2023

large_martin-sanchez-ezY6rc65mUE-unsplash.jpg

medium_martin-sanchez-ezY6rc65mUE-unsplash.jpg

small_martin-sanchez-ezY6rc65mUE-unsplash.jpg

thumbnail_martin-sanchez-ezY6rc65mUE-unsplash.jpg

martin-sanchez-ezY6rc65mUE-unsplash.jpg

Impact on the availability of resources as well as their effect on living organisms, ecosystems, and components of the environment.

Ecological Impact

Impacts on the social fabric of the community and well-being of the individuals and families.

Social Impact

Impacts on the financial condition of a company, as well as the the economicconditions of its stakeholders and on economic systems at local, national, andglobal levels.

Economic Impact

Impact on increased knowledge and understanding as a result of the case study

Increase Awareness

Impact on the quantity or quality of jobs, and shifts in the labour market

Jobs

Contribution to social parity, or impact on social disparity

Equality

Impact on the ease of innovation, and facilitating uptake of innovations

Innovation

Reduced use of virgin materials and/or an increase of the use of secondary and bio-based materials

Reduce Material Consumption (SDG12)

Minimise waste through diversion: Instead of sending waste to landfill, it is redirected into other industrial processes for handling, treatment, recycling, recovery, or reuse in various forms. 

Minimise waste through design: At the outset of a process of project, plan and design such that there is zero waste or minimal waste during production, use, and at end of life. 

Minimise Waste (SDG12)

Extracting resources and processing them to produce materials for use bysociety

Materials and Fuels

Societal Services

Producing building materials and providing services to create residential and non-residential infrastructure and real estate


Construction and Infrastructure

Collecting waste from households and businesses by means of refuse bins, wheeled bins, containers, etc., and providing treatment, incineration, materials recovery and reclamation, and disposal of hazardous and non-hazardous waste

Waste Management

Producing basic and specialty chemicals, inks, agricultural chemical such as fertilisers and pesticides, plastics including packaging, and rubber

Chemical and Plastic

Refining and processing ores and producing ferrous and non-ferrous metal and glass products, including packaging

Metal and Glass

Work together throughout the supply chain, internally within organisations and with the public sector and communities to increase transparency and create joint value

Team up to create joint value

Utilise bio-based, reusable, non-toxic and non-critical materials

Regenerative materials

Using materials that can be easily reused or recycled after use

Reusable, recyclable materials and inputs

'Inform' increases the overall levels of awareness and builds the necessary skills and knowledge around the circular economy to foster long-term change.

Inform

Data, knowledge & information sharing

'Mobilise' sets the direction of and builds momentum towards long-term change, while also determining how this direction is determined and governed.

Mobilise

Visions and Ambitions

Roadmaps and strategies and targets

Metrics and indicators to measure progress

Govern the Transition

Institutional design to enable circularity

Cross-departmental collaboration and engagement

 Convene Towards Action

Advocate for circular change

Voluntary agreements around circular ambitions

Redesign systems to lay the foundation for circular activities and enable the transition to a circular economy 

large_5R_Rethink.png

medium_5R_Rethink.png

small_5R_Rethink.png

thumbnail_5R_Rethink.png

5R_Rethink.png

Rethink

Do better with less by using and supporting infrastructure, processes and products that are designed to minimize material, water and energy use and waste generation from production to end of use


large_5R_Reduce.png

medium_5R_Reduce.png

small_5R_Reduce.png

thumbnail_5R_Reduce.png

5R_Reduce.png

Reduce

Eliminate waste by maximizing the recovery of resources at the end of the use phase so that they can be reintroduced into production processes


large_5R_Recover.png

medium_5R_Recover.png

small_5R_Recover.png

thumbnail_5R_Recover.png

5R_Recover.png

Recover

High-level changes to policy and practice (such as taxation systems, investment and procurement guidelines and criteria) that disincentivize activities that perpetuate linear economic systems, as well as vision-setting (goals, roadmaps) to catalyze
action on circularity across the city

Eliminate linear incentives and set goals and incentives for circularity

Increase efficiency and promote local economic growth by shortening supply chains and connecting local producers to consumers.


Support local low-impact circular economies

Incorporate extended use in project planning phases; create or update city policies to allow for extended use.


Design and regulate for separation and recovery

In November 2019, the Ann Arbor City Council adopted A2ZERO: A Living Carbon Neutrality Plan to achieve a just transition to community-wide carbon neutrality by 2030 in four sectors: energy, mobility, resources' usage reduction, and adaptation and resilience.The plan aims to eliminate 2.1 million metric tons of carbon dioxide equivalent emissions annually and focuses on seven strategies and 44 actions identified by members of the public, technical advisors, the peer-reviewed and grey literature, and internal staff. One of these strategies is “Change the way we use, reuse, and dispose of materials” with a focus on the circular economy.