small_iclei.png

thumbnail_iclei.png

iclei.png


Circle Economy and ICLEI have partnered up to initiate the go to knowledge hub of case studies about the circular economy in cities. The Cities Collection is a repository of case studies that demonstrate the role of cities in the circular transition, and includes policies, business cases and research articles. Cases in the Collection flow into an ecosystem of digital products which support users in transitioning cities to circularity, for example [Ganbatte](https://ganbatte.world/cities/) and <a href="https://circulars.iclei.org/" target="_blank">ICLEI Circulars</a>, both part of the <a href="https://circulars.iclei.org/circle-lab-for-cities/" target = _blank">Circle Lab for Cities Programme.</a>




large_Circular-City-Actions-Framework-infographic-scaled_gray background.jpeg

medium_Circular-City-Actions-Framework-infographic-scaled_gray background.jpeg

small_Circular-City-Actions-Framework-infographic-scaled_gray background.jpeg

thumbnail_Circular-City-Actions-Framework-infographic-scaled_gray background.jpeg

Circular-City-Actions-Framework-infographic-scaled_gray background.jpeg

Circular Cities

large_eugene-kuznetsov-swmakc2l4EM-unsplash_2.jpeg

medium_eugene-kuznetsov-swmakc2l4EM-unsplash_2.jpeg

small_eugene-kuznetsov-swmakc2l4EM-unsplash_2.jpeg

thumbnail_eugene-kuznetsov-swmakc2l4EM-unsplash_2.jpeg

eugene-kuznetsov-swmakc2l4EM-unsplash_2.jpeg

Policy case

Reduced green house gas emissions released into the biosphere

Reduce Emissions (SDG13)

Minimise waste through diversion: Instead of sending waste to landfill, it is redirected into other industrial processes for handling, treatment, recycling, recovery, or reuse in various forms. 

Minimise waste through design: At the outset of a process of project, plan and design such that there is zero waste or minimal waste during production, use, and at end of life. 

Minimise Waste (SDG12)

Providing electricity and gas services, including traditional and renewable energy generation, natural and manufactured gas and operating gas networks

Energy Utilities and Independent Power Producers

Utilise waste streams as a source of secondary resources and recover waste for reuse and recycling

Use waste as a resource

Using renewable energy like solar, wind, etc. or renewable fuels like biomass, etc.

Renewable energy, fuels

'Inform' increases the overall levels of awareness and builds the necessary skills and knowledge around the circular economy to foster long-term change.

Inform

Solidify definitions and create frameworks to support the understanding of the circular economy across contexts and maintain cohesive systems of data sharing, processing and storing.


 Knowledge Management

Data, knowledge & information sharing

Raise awareness and run information campaigns about  strategies for and impacts of the circular economy in different contexts.

Communication and awareness

Eliminate waste by maximizing the recovery of resources at the end of the use phase so that they can be reintroduced into production processes


large_5R_Recover.png

medium_5R_Recover.png

small_5R_Recover.png

thumbnail_5R_Recover.png

5R_Recover.png

Recover

Incorporate extended use in project planning phases; create or update city policies to allow for extended use.


Design and regulate for separation and recovery

Cities consume about 75% of global energy and emit between 50% and 60% of global greenhouse gases (UN-Habitat). To reduce the negative impact of their energy consumption, cities need to shift away from fossil fuels and move towards renewable energy sources. Such a shift will help cities work towards their climate change mitigation and adaptation action plans. Renewable energy technologies such as wind, water, solar, and geothermal can also help improve access to energy in vulnerable and marginalised neighbourhoods through, for example, decentralised, off-grid solutions.

Renewable energy technologies can harvest the energy in nature’s processes, such as wind, and solar radiation and geothermal heat, that can be replenished within a human lifespan. In contrast, fossil fuels are materials that are not replenished within a human lifespan and are combusted for energy, losing the fuel material and resulting in emissions.

Local governments can develop sustainable energy plans, considering different energy resources and requirements, to develop a robust strategy for the development of renewable energy technologies and infrastructure throughout the city. They can also institute specific legislation and tax systems to regulate energy production and consumption, incentivise research and development of cleaner, more efficient technologies. Via Power Purchase Agreements cities can buy renewable energy from green energy providers and fix the price in order to provide security to financial institutions to finance renewable energy infrastructure. Furthermore, increasing awareness and facilitating capacity-building on planning urban sustainable energy projects can help the uptake of clean energy across the city by different stakeholders—from citizens to businesses and institutions. Facilitating collaboration, then, will be crucial, since private companies operate most of the world’s energy systems.


⚡ Energy Systems

Governments

Cycle strategies aim to cycle and reuse materials at their highest value: they maximise the volume of secondary materials re-entering the economy, ultimately minimising the need for virgin material inputs and therefore also narrowing flows. Of course, virgin materials will always be needed to a degree: all materials degrade and can’t be cycled infinitely, use energy, and require blending with virgin materials to maintain strength and functionality.

Cycle

Ensure renewable, reusable, non-toxic resources are utilised as materials and energy in an efficient way

Prioritise regenerative resources

While resources are in-use, maintain, repair and upgrade them to maximise their lifetime and give them a second life through take back strategies when applicable

Stretch the lifetime

Consider opportunities to create greater value and align incentives that build on the interaction between products and services

Rethink the business model

Account for the systems perspective during the design process, to use the right materials, to design for appropriate lifetime and to design for extended future use

Design for the future

Work together throughout the supply chain, internally within organisations and with the public sector and communities to increase transparency and create joint value

Team up to create joint value

Use digital, online platforms and technologies that provide insights to track and optimise resource use, strengthen connections between supply chain actors, and enable the implementation of circular models



Incorporate digital technology

Utilise bio-based, reusable, non-toxic and non-critical materials

Regenerative materials

Replace freshwater with less impactful alternatives and enact water efficiency measures

Regenerative water

Replace energy sources with less impactful alternatives and enact energy efficiency measures

Regenerative energy

Upgrade, repair, and maintenance while in-use

Maximise lifetime of products in-use

Give products and parts another life after their end-of-use

Maximise lifetime of products after use

Ensure that biological products are properly managed and preserved

Maximise lifetime of biological products

Reuse, repurpose, and recycle waste streams within the same industry

Valorise waste streams - closed loop

Reuse, repurpose, and recycle waste streams within other industries

Valorise waste streams - open loop

Recover waste energy or generate fuels and energy from waste streams

Energy recovery from waste

Deliver products through business models that ensure maximum value

Product business models

Deliver services through business models that ensure maximum value

Service business models

Designing to reduce waste during production and use

Design out waste

Designing to enable multiple uses and lifecycles of a product and its materials

Design for cyclability

Designing products that are made to last and to ensure longer use

Design for durability

Industry peers to industry peer collaboration to create joint value and identify synergies

Industry collaboration

Engage and guide customers and consumers to ensure circular use of products

Customer / consumer collaboration

Engage with the government on circular policies and programmes

Government collaboration

Engage internally to guide employees and facilitate greater knowledge sharing between internal divisions

Internal collaboration

Engage with the local community where facilities or offices are located

Community collaboration

Employ technologies to gather and analyse data to provide insights on resource use

Data and insights

Employ online platforms to connect and improve information sharing between stakeholders

Digital platforms

Using bio-based materials such as bioplastics, mushroom-based materials, etc.

Alternative bio-based materials and inputs

Enacting measures that optimise material use such as 3D printing, etc.

Material efficiency

Using <a href="http://ec.europa.eu/growth/sectors/raw-materials/specific-interest/critical_sv" target="_blank">materials that are not considered critical</a>.

Non-critical materials and inputs 

Using <a href="https://echa.europa.eu/information-on-chemicals" target="_blank">materials that are not toxic or hazardous</a>.

Non-toxic materials and inputs

Using materials that can be easily reused or recycled after use

Reusable, recyclable materials and inputs

Replacing freshwater use with rainwater, fogwater, seawater, etc.

Alternative water use

Enacting measures that optimise water use

Water efficiency

Converting fossil fuel based operations to electric

Electrification

Enacting measures that optimise energy use

Energy efficiency

Providing repair services or maintenance services for products or parts

Product maintenance, repair

Providing upgrade programmes or upgrade services for products or parts of products

Product upgrade

Providing DIY repair kits or spare part programmes for enabling self-repair

Self-repair, spare part service

Extraction and reuse of parts from end-of-life products for use in new products

Part recovery

Activities to clean, decorate, and restore products back to working condition for original or new purposes

Refurbishment, remanufacturing, renovation

Marketplaces or services that enable the second hand sale of own-brand products

Own brand second-hand sale

Marketplaces or services that enable the second hand sale of products

Second-hand sale, distribution

Preserving and conserving biological products such as food, forests, etc.

Preservation, conservation

Managing and enriching biological products such as soil, land, etc.

Management, enrichment

Collection programmes that process products and parts for reuse or recycling within the same industry

Closed loop collection

Transforming waste products, materials for reuse within the same industry

Closed loop upcycling

Using waste materials that have been processed and recycled to produce new products within the same industry

Using closed loop recycled materials

Transforming waste products into materials and lower value products within the same industry

Closed loop downcycling

Collection programmes that process products and parts for reuse or recycling within other industries

Open loop collection

Transforming waste products into materials and lower value products within other industries

Open loop downcycling

Transforming waste products, materials for reuse within other industries

Open loop upcycling

Using waste materials that have been processed and recycled to produce new products within other industries

Using open loop recycled materials

Generating energy from waste through processes such as anaerobic digestion, gasification, incineration, etc.

Generating energy from waste

Processing waste streams into fuels such as biogas, biofuels, pellets, etc.

Processing waste into fuel

Recovering and reusing waste heat, gas, etc. for energy

Recovery and reuse of waste energy

Selling parts of modular products that can be refilled

Sale of refillable parts

Providing products through leasing, rental, or pay-per-use models instead of sales

Leasing, rental, pay per use

Providing products through sharing between consumers, customers, etc.

Peer to peer sharing

Selling high quality, long-lasting products

Sale of durable, long-lasting goods

Selling parts of modular products that can be exchanged or replaced

Sale of exchangeable parts

Providing services through a subscription plan with regular payment schemes

Subscription-based services

Decentralised services that rely on the power of the crowd or the community

Crowd-based services

Providing services where customers are charged only when they use it

Payment per use

Designing products so they produce as little waste as possible during production

Design for minimal waste

Designing products so they use as little materials, water, energy, etc. as possible during use

Design for resource efficiency

Designing products that can easily breakdown and degrade in the environment

Design for bio-degradability

Designing products of multiple parts that can be easily disassembled

Design for disassembly

Designing products of multiple parts that can be easily exchanged

Design for modularity

Designing products to remove any barriers to recycling and enable easy recyclability

Design for recycling

Designing products with a single material type to more easily recycle them after use

Design for recycling - mono-materials

Designing products so they are able to be easily repaired

Design for repair

Designing products to be reused for the same or different purposes in multiple lifecycles

Design for reuse

Designing products to resist damage and wear, and serve a long and useful life.

Design for physical durability

Designing products to increase consumer’s emotional attachment and ensure longer use

Design for product attachment, emotional durability

Putting in place purchasing guidelines for procurement departments and evaluating suppliers on circular economy principles

Circular procurement

Working together with stakeholders and parties in other unrelated industries to implement circular economy strategies and opportunities

Cross-industry projects, pilots

Key elements of the circular economy

<p>The New York&nbsp;State Energy Research and Development Authority (NYSERDA) provides a Model Solar Energy Local Law, intended to be an “all-inclusive” ordinance to allow for a thorough review of all aspects of solar energy systems under typical zoning and land use regulation. It also provides information for local governments and landowners on the decommissioning of large-scale solar panel systems.</p>