small_iclei.png

thumbnail_iclei.png

iclei.png


Circle Economy and ICLEI have partnered up to initiate the go to knowledge hub of case studies about the circular economy in cities. The Cities Collection is a repository of case studies that demonstrate the role of cities in the circular transition, and includes policies, business cases and research articles. Cases in the Collection flow into an ecosystem of digital products which support users in transitioning cities to circularity, for example [Ganbatte](https://ganbatte.world/cities/) and <a href="https://circulars.iclei.org/" target="_blank">ICLEI Circulars</a>, both part of the <a href="https://circulars.iclei.org/circle-lab-for-cities/" target = _blank">Circle Lab for Cities Programme.</a>




large_Circular-City-Actions-Framework-infographic-scaled_gray background.jpeg

medium_Circular-City-Actions-Framework-infographic-scaled_gray background.jpeg

small_Circular-City-Actions-Framework-infographic-scaled_gray background.jpeg

thumbnail_Circular-City-Actions-Framework-infographic-scaled_gray background.jpeg

Circular-City-Actions-Framework-infographic-scaled_gray background.jpeg

Circular Cities

large_eugene-kuznetsov-swmakc2l4EM-unsplash_2.jpeg

medium_eugene-kuznetsov-swmakc2l4EM-unsplash_2.jpeg

small_eugene-kuznetsov-swmakc2l4EM-unsplash_2.jpeg

thumbnail_eugene-kuznetsov-swmakc2l4EM-unsplash_2.jpeg

eugene-kuznetsov-swmakc2l4EM-unsplash_2.jpeg

Policy case

Reduced green house gas emissions released into the biosphere

Reduce Emissions (SDG13)

Minimise waste through diversion: Instead of sending waste to landfill, it is redirected into other industrial processes for handling, treatment, recycling, recovery, or reuse in various forms. 

Minimise waste through design: At the outset of a process of project, plan and design such that there is zero waste or minimal waste during production, use, and at end of life. 

Minimise Waste (SDG12)

Reduced use and withdrawal of water and rate of recycling and reuse of water

Save Water (SDG6)

Providing electricity and gas services, including traditional and renewable energy generation, natural and manufactured gas and operating gas networks

Energy Utilities and Independent Power Producers

Providing water and sewage services, including water collection and distribution, water treatment systems and sewage treatment facilities

Water and Sewage

Collecting waste from households and businesses by means of refuse bins, wheeled bins, containers, etc., and providing treatment, incineration, materials recovery and reclamation, and disposal of hazardous and non-hazardous waste

Waste Management

Recover waste energy or generate fuels and energy from waste streams

Energy recovery from waste

Using <a href="http://ec.europa.eu/growth/sectors/raw-materials/specific-interest/critical_sv" target="_blank">materials that are not considered critical</a>.

Non-critical materials and inputs 

Using <a href="https://echa.europa.eu/information-on-chemicals" target="_blank">materials that are not toxic or hazardous</a>.

Non-toxic materials and inputs

Transforming waste products, materials for reuse within other industries

Open loop upcycling

Processing waste streams into fuels such as biogas, biofuels, pellets, etc.

Processing waste into fuel

'Manage' influences the use and function of physical and material elements within the urban environment. 

Manage

Infrastructure

Develop infrastructure to support resource cycling

Eliminate waste by maximizing the recovery of resources at the end of the use phase so that they can be reintroduced into production processes


large_5R_Recover.png

medium_5R_Recover.png

small_5R_Recover.png

thumbnail_5R_Recover.png

5R_Recover.png

Recover

Process waste into valuable industrial inputs or consumer products; distribute processed waste to users.

Process waste and ensure its re-entry into industry at its highest value

Residual organic and food wastes can offer a quasi-renewable and low-carbon source of energy. By processing organic wastes, often under high temperatures, pressures and in the absence of oxygen, organic wastes can be transformed into fuels, which can be used for heating, electricity generation, as well as transportation. A variety of technologies have been developed to generate biogas from organic materials, for example, anaerobic digestion. Such facilities can vary in scale from single units that can process the waste of a single building or neighbourhood, to large-scale facilities that can process the majority of the organic wastes generated from the entire city. 

Cities have a key role to support the utilisation of organic materials as biofuels due to their close oversight and influence on the urban waste management system. In particular, cities can support the financing of large-scale facilities to help to overcome the investment costs, as well as develop relationships with businesses to operate such facilities. 


large_biogas - marra-rwjz0jBZPqs-unsplash.jpeg

medium_biogas - marra-rwjz0jBZPqs-unsplash.jpeg

small_biogas - marra-rwjz0jBZPqs-unsplash.jpeg

thumbnail_biogas - marra-rwjz0jBZPqs-unsplash.jpeg

biogas - marra-rwjz0jBZPqs-unsplash.jpeg

🍏  💧  Biogas from organic materials

The food system nourishes populations and employs 50% of the global workforce, but:
- it currently drives a quarter of the overshoot on the climate change planetary boundary due to its greenhouse gas (GHG) production, 
- animal farming alone uses over one-quarter of all land, equivalent to the size of the Americas,
- nearly a quarter of freshwater resources are lost due to rampant food waste, and
- it is the single largest driver of biodiversity loss.

A circular food system must address the whole value chain, from production to consumption to waste management. The four key solutions for the food system are:
- Put healthier, satiating foods first: Prioritise satiating and healthy foods with a lower environmental impact—ideally shifting calories from meat, fish, and dairy towards cereals, fruits, vegetables, and nuts.
- Go local, seasonal, and organic: Prioritise the production and consumption of local, seasonal, and organic produce (sometimes in combination with GMO to reduce pests and disease loss on crops), which can lead to a significantly reduced need for chemical inputs, fuels, and processing services that contribute to environmental impacts.
- Mainstream regenerative agriculture: Scale up agricultural practices that regenerate ecosystems, recirculate nutrients and sequester carbon by design. 
- End avoidable food waste: Minimise food loss and valorise waste following the food waste hierarchy along the supply chain and at the consumer level through better management of transport and storage, more refrigeration and smart planning, and technology at the consumer and food service levels.



🍏 Food Systems

The demand for transport is rising globally—but current modes are heavily material- and fossil-fuels-intensive. Emissions from the transport system could grow by 60% by 2050, and transport is the number-one user of oil worldwide. GHG emissions result not only in warming global temperatures, but also in ocean acidification, which has severe consequences for entire ecosystems and further destabilises our climate. The transport system also drives land-use change and biodiversity loss through the development of infrastructure—also releasing harmful pollutants into the ocean. Key circular solutions:

- Embrace and enable car-free lifestyles
- Invest in high-quality public transport
- Rethink unnecessary air travel
- Electrify remaining vehicles

🚌 Mobility Systems

Governments

Water system refers to the water supply network for storing and supplying water for use by the community.

One of the greatest challenges of a city is to provide its inhabitants with safe, clean water from a limited fresh water supply. Improving the city’s water infrastructure efficiency, such as minimising leakages, reduces the strain put on the limited supply, which in turn, helps to ensure inhabitants gain access to clean and affordable water.

The water infrastructure of a city typically consists of components such as surface water diversions, wells, pumps, transmission pipes and canals, treatment and storage facilities, and distribution network elements (Burian et al.). Options for improving the efficiency of the system include investing in water loss reduction systems, creating and following a regular maintenance program, and better matching water supply and demand (Global Water Partnership).

Cities can improve the efficiency of their water system infrastructure by conducting a water audit, in which all water flows are traced and losses in the system are identified to map where the most efficiency improvements can be gained. Alongside this, asset management can be used to create a short-term and long-term strategy of investing in new equipment, refurbishing existing equipment and developing maintenance programmes to ensure infrastructure is as efficient as possible, and leaks are minimised. Such management programmes create financial transparency amongst all stakeholders and provide useful long-term planning for larger infrastructure changes (US EPA)

💧 Water Systems

Much of the wastewater generated by homes, industries, and businesses must be treated before it is released back into the environment. This is because it contains nutrients and other substances that can be harmful to the environment and human health, as well as to aquatic fauna and flora. These nutrients can cause oxygen depletion in water bodies, beach closures and contamination of drinking water. However, if the nutrients are recovered, they can often be put to beneficial use. 

For instance, biorefineries use wastewater as a source of raw materials, generating products of value from waste nutrients and simultaneously producing clean water for reuse or discharge. Nutrients such as nitrogen and phosphorus can be converted into environmentally friendly fertilisers, and used for ecological restoration and agricultural purposes. Biosolids from wastewater can be used as fuel for heating, replacing fossil fuels and reducing the amount of biosolids sent to landfill. 

Local governments have an important role to play in providing pipes, water management and treatment infrastructure to ensure that water is safely handled. They can also play a role in monitoring privately run facilities to ensure compliance with environmental performance standards. Finally, cities can connect stakeholders to match supply and demand for non-potable water, energy and nutrients recovered from wastewater.


large_ivan-bandura-6wSevhW1Dzc-unsplash (1).jpg

medium_ivan-bandura-6wSevhW1Dzc-unsplash (1).jpg

small_ivan-bandura-6wSevhW1Dzc-unsplash (1).jpg

thumbnail_ivan-bandura-6wSevhW1Dzc-unsplash (1).jpg

ivan-bandura-6wSevhW1Dzc-unsplash (1).jpg

💧  Recovery of nutrients and chemicals from wastewater and sludge

Cycle strategies aim to cycle and reuse materials at their highest value: they maximise the volume of secondary materials re-entering the economy, ultimately minimising the need for virgin material inputs and therefore also narrowing flows. Of course, virgin materials will always be needed to a degree: all materials degrade and can’t be cycled infinitely, use energy, and require blending with virgin materials to maintain strength and functionality.

Cycle

Engage with the local community where facilities or offices are located

Community collaboration

Designing products that can easily breakdown and degrade in the environment

Design for bio-degradability

Replace energy sources with less impactful alternatives and enact energy efficiency measures

Regenerative energy

Selling parts of modular products that can be exchanged or replaced

Sale of exchangeable parts

Working together with stakeholders and parties in other unrelated industries to implement circular economy strategies and opportunities

Cross-industry projects, pilots

Designing to enable multiple uses and lifecycles of a product and its materials

Design for cyclability

Engaging in discussions with government bodies and policymakers to push for regulations that support the circular economy

Advocacy for circular economy policy

Using renewable energy like solar, wind, etc. or renewable fuels like biomass, etc.

Renewable energy, fuels

Designing products of multiple parts that can be easily exchanged

Design for modularity

Working together with industry peers to engage in business activities or exploratory projects that advance the circular economy

Joint industry ventures, projects, pilots

Providing products through sharing between consumers, customers, etc.

Peer to peer sharing

Transforming waste products into materials and lower value products within other industries

Open loop downcycling

Providing DIY repair kits or spare part programmes for enabling self-repair

Self-repair, spare part service

Engage and guide customers and consumers to ensure circular use of products

Customer / consumer collaboration

Transforming waste products, materials for reuse within the same industry

Closed loop upcycling

Designing to reduce waste during production and use

Design out waste

Allowing customers to alter and modify certain features of the product

Customisation

Facilitate discussions and meetings between internal team members to identify circular opportunities

Dialogue with internal stakeholders

Generating energy from waste through processes such as anaerobic digestion, gasification, incineration, etc.

Generating energy from waste

Use digital, online platforms and technologies that provide insights to track and optimise resource use, strengthen connections between supply chain actors, and enable the implementation of circular models



Incorporate digital technology

While resources are in-use, maintain, repair and upgrade them to maximise their lifetime and give them a second life through take back strategies when applicable

Stretch the lifetime

Industry peers to industry peer collaboration to create joint value and identify synergies

Industry collaboration

Preserving and conserving biological products such as food, forests, etc.

Preservation, conservation

Working together with the community and engaging them in the company operations

Joint product development

Reuse, repurpose, and recycle waste streams within the same industry

Valorise waste streams - closed loop

Replacing freshwater use with rainwater, fogwater, seawater, etc.

Alternative water use

Initiatives with disadvantaged communities, minorities, people distanced from the labour market

Give-back programmes

Using bio-based materials such as bioplastics, mushroom-based materials, etc.

Alternative bio-based materials and inputs

Using waste materials that have been processed and recycled to produce new products within other industries

Using open loop recycled materials

Employ technologies to gather and analyse data to provide insights on resource use

Data and insights

Designing products so they produce as little waste as possible during production

Design for minimal waste

Takeback and return of products from customers after end-of-use

Takeback programmes

Upgrade, repair, and maintenance while in-use

Maximise lifetime of products in-use

Enacting measures that optimise water use

Water efficiency

Designing products that are made to last and to ensure longer use

Design for durability

Installing sensors to gather data from products and services to identify, enable and/or implement circular strategies (eg. effective resource use & logistics planning, circular business models & design)

Sensors, monitoring systems

Decentralised services that rely on the power of the crowd or the community

Crowd-based services

Marketplaces or services that enable the second hand sale of products

Second-hand sale, distribution

Engage internally to guide employees and facilitate greater knowledge sharing between internal divisions

Internal collaboration

Collection programmes that process products and parts for reuse or recycling within other industries

Open loop collection

Engage with the government on circular policies and programmes

Government collaboration

Engaging in discussions with customers to educate and raise awareness of the circular economy and explore circular opportunities together

Customer dialogue, marketing 

Integrating circular economy thinking into employee evaluations that are tied to professional compensation

Financial incentives tied to circular economy

 Develop research, structure knowledge, encourage innovation networks and disseminate findings with integrity


Strengthen and advance knowledge

Designing products so they are able to be easily repaired

Design for repair

Reuse, repurpose, and recycle waste streams within other industries

Valorise waste streams - open loop

Employ online platforms to connect and improve information sharing between stakeholders

Digital platforms

Integrate principles of circularity into primary, secondary and tertiary curriculum and conduct workplace trainings

 Education and Curriculum

Account for the systems perspective during the design process, to use the right materials, to design for appropriate lifetime and to design for extended future use

Design for the future

Enacting measures that optimise energy use

Energy efficiency

Converting fossil fuel based operations to electric

Electrification

Collection programmes that process products and parts for reuse or recycling within the same industry

Closed loop collection

Selling high quality, long-lasting products

Sale of durable, long-lasting goods

Employing artificial algorithms and robotics to identify, enable and/or implement circular strategies (eg. effective resource use & logistics planning, circular business models & design)

Advanced robotics, artificial intelligence

Connecting products and services into the internet of things to identify, enable and/or implement circular strategies (eg. effective resource use & logistics planning, circular business models & design)

Internet enabled, connected operations

Utilise waste streams as a source of secondary resources and recover waste for reuse and recycling

Use waste as a resource

Developing or utilising online platforms to enable circular economy opportunities through information, product or service offering

Online platforms

Putting in place purchasing guidelines for procurement departments and evaluating suppliers on circular economy principles

Circular procurement

Providing upgrade programmes or upgrade services for products or parts of products

Product upgrade

Transforming waste products into materials and lower value products within the same industry

Closed loop downcycling

Designing products to increase consumer’s emotional attachment and ensure longer use

Design for product attachment, emotional durability

Replace freshwater with less impactful alternatives and enact water efficiency measures

Regenerative water

Providing repair services or maintenance services for products or parts

Product maintenance, repair

Ensure renewable, reusable, non-toxic resources are utilised as materials and energy in an efficient way

Prioritise regenerative resources

Key elements of the circular economy

<p>In Turku, even sludge does not go to waste. Sludge, a by-product of the city’s wastewater treatment, is processed with anaerobic digestion. Besides producing biogas, which is used to help power transport in the city, nutrients recovered from the process are used in landscaping and agriculture, which reduces reliance on fertilizers.&nbsp;</p>