large_bax-logo-mih-dark-background.png

medium_bax-logo-mih-dark-background.png

small_bax-logo-mih-dark-background.png

thumbnail_bax-logo-mih-dark-background.png

bax-logo-mih-dark-background.png

**Bax Innovation is a forward-thinking innovation consultancy dedicated to transforming ideas into societal impact. Our work in circularity spans a multitude of industries and topics, including wind energy, battery storage, sharing cities, and the urban bio-economy.  We partner with organisations to design scalable solutions for the circular economy, focusing on reducing waste and optimising resource use.**

Our expertise encompasses:​

**Materials circularity:** Identifying, evaluating, and shaping interventions that create maximum value from materials, ensuring they remain in use for as long as possible.​

**Circular business modelling:** Developing, testing, and scaling business models that create, retain, or recover value, facilitating the transition from linear to circular practices.​

**Creating circular value networks:** Bringing together stakeholders to transfer knowledge, take action, and create shared value, fostering collaborative approaches to circularity.​

By collaborating with public and private sector leaders, Bax is driving practical, impactful circular economy solutions across industries. Our case studies exemplify how circular principles can be applied to a wide range of challenges—from energy and materials to urban systems and the sharing economy. Through this collection, we share insights and learnings to inspire further action in creating a sustainable, circular world.

**For more information on our work and projects, please visit: [https://baxcompany.com/case-studies/](https://baxcompany.com/case-studies/)**

**If you'd like to reach out to a member of the team, email us at [contact@baxcompany.com](mailto:contact@baxcompany.com)**

Bax Innovation

large_Untitled design (1).png

medium_Untitled design (1).png

small_Untitled design (1).png

thumbnail_Untitled design (1).png

Untitled design (1).png

Article / Report

Direct and indirect reduction in economic costs

Cost Savings

Efficiency gains on operations or transactions either through cultural or technological shifts

Productivity

Impact on the ease of innovation, and facilitating uptake of innovations

Innovation

Reduced green house gas emissions released into the biosphere

Reduce Emissions (SDG13)

Reduced use of fossil fuel energy sources and/or increased use of renewable energy

Reduce Energy Consumption

Producing electronics products for businesses and consumers, including cellular phones, personal computers, printers, servers, electronic computer components and peripherals, TVs, audio equipment, as well as household appliances, such as refrigerators, washing machines, etc.

Electronics and Appliances

Providing air, water, rail, and land transportation and related services for the distribution of goods, such as air freight, air courier and logistics services, maritime freight, marine courier and logistics services, rail freight, rail courier and logistics services, land freight, land courier and logistics services, including package and mail delivery and customs agents, as well as storage and warehouse facilities

Logistics Services

Producing transportation equipment for the movement of goods and people by air, rail, sea, and land, including airplanes, spacecraft and military equipment, ships, boats, rail locomotives and rolling stock, motor vehicles, trailers and semi-trailers, and related equipment, as well as repair services for such equipment

Transportation Equipment

Producing electric cables and wires, power-generating equipment, including solar modules, motors, power turbines, as well as electronic equipment and instruments, including computer chips, communication equipment, analytical instruments, lasers, display screens, point-of-sales machines, security system equipment, and healthcare equipment

Electrical and Electronic Equipment

Providing repair services or maintenance services for products or parts

Product maintenance, repair

Activities to clean, decorate, and restore products back to working condition for original or new purposes

Refurbishment, remanufacturing, renovation

Providing services through a subscription plan with regular payment schemes

Subscription-based services

Designing products of multiple parts that can be easily disassembled

Design for disassembly

Designing products to remove any barriers to recycling and enable easy recyclability

Design for recycling

Designing products so they are able to be easily repaired

Design for repair

Designing products to be reused for the same or different purposes in multiple lifecycles

Design for reuse

Working together with stakeholders and parties in other unrelated industries to implement circular economy strategies and opportunities

Cross-industry projects, pilots

Working together with industry peers to engage in business activities or exploratory projects that advance the circular economy

Joint industry ventures, projects, pilots

Employing artificial algorithms and robotics to identify, enable and/or implement circular strategies (eg. effective resource use & logistics planning, circular business models & design)

Advanced robotics, artificial intelligence

Utilising data and models to to identify, enable and/or implement circular strategies (eg. effective resource use & logistics planning, circular business models & design)

Data analytics, modelling

Connecting products and services into the internet of things to identify, enable and/or implement circular strategies (eg. effective resource use & logistics planning, circular business models & design)

Internet enabled, connected operations

Developing or utilising online platforms to enable circular economy opportunities through information, product or service offering

Online platforms

Data, knowledge & information sharing

Extended Producer Responsibility

**Ensure access to affordable, reliable, sustainable and modern energy for all**

![7..JPG](https://goldilocks-images.s3.eu-west-1.amazonaws.com/7_9f1c6e1d56.JPG)

Access to electricity and clean cooking fuels has improved in many parts of the world, but 675 million people are yet to be connected to the grids and 2.3 billion are still cooking with unsafe and polluting fuels. 
The war in Ukraine and global economic uncertainty continue to cause significant volatility in energy prices, leading some countries to raise investments in renewables and others to increase reliance on coal, putting the green transition at risk. If the current pace continues, about 660 million people will still lack access to electricity and close to 2 billion people will continue to rely on polluting fuels and technologies for cooking by 2030. 

To ensure access to energy for all by 2030, we must accelerate electrification, increase investments in renewable energy sources, and invest in improving electricity grids.

This goal's targets include: 
- ensure universal access to affordable, reliable and modern energy services;
- increase substantially the share of renewable energy in the global energy mix;
- double the global rate of improvement in energy efficiency;
- enhance international cooperation to facilitate access to clean energy research and technology, including renewable energy, energy efficiency and advanced and cleaner fossil-fuel technology, and promote investment in energy infrastructure and clean energy technology
- enhance international cooperation to facilitate access to clean energy research and technology, including renewable energy, energy efficiency and advanced and cleaner fossil-fuel technology, and promote investment in energy infrastructure and clean energy technology.

Source : [https://sdgs.un.org/goals/goal7](https://sdgs.un.org/goals/goal7)

large_Sustainable_Development_Goal_7.png

medium_Sustainable_Development_Goal_7.png

small_Sustainable_Development_Goal_7.png

thumbnail_Sustainable_Development_Goal_7.png

Sustainable_Development_Goal_7.png

7. Affordable and clean energy

Ensure access to affordable, reliable, sustainable and modern energy for all

**Build resilient infrastructure, promote inclusive and sustainable industrialization and foster innovation**

![9..JPG](https://goldilocks-images.s3.eu-west-1.amazonaws.com/9_aa8da1d9c6.JPG)

The manufacturing industry’s recovery from COVID-19 remains incomplete and uneven: some high-income regions achieved record-high manufacturing value added per capita in 2022 but levels in LDCs were not much higher than the 2015 baseline. 
In the aftermath of the pandemic, data show that higher-technology industries recovered faster and proved to be more resilient, pointing to the need to promote innovation and technology transfer in a way that benefits all countries. 

Inclusive and sustainable industrial development has been incorporated, together with resilient infrastructure and innovation, as Sustainable Development Goal 9 in the 2030 Agenda for Sustainable Development.

To achieve Goal 9 by 2030 it is essential to support LDCs, invest in advanced technologies, lower carbon emissions, and increase global mobile broadband access.

This goal's target includes:
- develop quality, reliable, sustainable and resilient infrastructure, including regional and transborder infrastructure, to support economic development and human well-being, with a focus on affordable and equitable access for all;
- promote inclusive and sustainable industrialization and, by 2030, significantly raise industry’s share of employment and gross domestic product, in line with national circumstances, and double its share in least developed countries;
- increase the access of small-scale industrial and other enterprises, in particular in developing countries, to financial services, including affordable credit, and their integration into value chains and markets;
- by 2030, upgrade infrastructure and retrofit industries to make them sustainable, with increased resource-use efficiency and greater adoption of clean and environmentally sound technologies and industrial processes, with all countries taking action in accordance with their respective capabilities;
- enhance scientific research, upgrade the technological capabilities of industrial sectors in all countries, in particular developing countries, including, by 2030, encouraging innovation and substantially increasing the number of research and development workers per 1 million people and public and private research and development spending;
- facilitate sustainable and resilient infrastructure development in developing countries through enhanced financial, technological and technical support to African countries, least developed countries, landlocked developing countries and small island developing States;
- support domestic technology development, research and innovation in developing countries, including by ensuring a conducive policy environment for, inter alia, industrial diversification and value addition to commodities;
- significantly increase access to information and communications technology and strive to provide universal and affordable access to the Internet in least developed countries by 2020.

Sources: [https://sdgs.un.org/goals/goal9](https://sdgs.un.org/goals/goal9)
[https://sdgs.un.org/topics/industry](https://sdgs.un.org/topics/industry)

large_Sustainable_Development_Goal_9.png

medium_Sustainable_Development_Goal_9.png

small_Sustainable_Development_Goal_9.png

thumbnail_Sustainable_Development_Goal_9.png

Sustainable_Development_Goal_9.png

9. Industry, innovation and infrastructure  

Build resilient infrastructure, promote inclusive and sustainable industrialization and foster innovation

**Ensure sustainable consumption and production patterns**

![12..JPG](https://goldilocks-images.s3.eu-west-1.amazonaws.com/12_ff44598f2b.JPG)

The world is seriously off track in its effort to halve per-capita food waste and losses by 2030.The COVID-19 pandemic has had significant impacts on consumption and production patterns, with disruptions to global supply chains and changes in consumer behaviour. 

Responsible consumption and production must be an integral part of the recovery from the pandemic. 
But the global economy also needs to speed up the decoupling of economic growth from resource use by maximizing the socio-economic benefits of resources while minimizing their negative impacts. 

Reporting on corporate sustainability has tripled since the beginning of the SDG period, but the private sector will need to significantly improve reporting on activities that contribute to the SDGs. 

This primarily entails environmentally sound management of "toxic chemicals" A substantial use of chemicals is essential to meet the social and economic goals of the world community, and these can be used with a high degree of safety when best practices are followed.  Gross chemical contamination, with grave damage to human health, genetic structures reproductive outcomes, and the environment, has been continuing within some of the world's most important industrial areas, and restoration will require major investment as well as the development of new techniques.
Effective control of the generation, storage, treatment, recycling and reuse, transport, recovery and disposal of hazardous wastes is another similar challenge. 
In addition,  solid wastes include all domestic refuse and non-hazardous wastes such as commercial and institutional wastes, street sweepings construction debris, and, in some countries, human wastes. As hazardous waste is frequently intermixed with other waste, this poses particular management challenges.
Finally, this target ensures that radioactive waste is safely managed, transported, stored and disposed of, with a view to protecting human health and the environment. 

To deliver SDG12, it is crucial to implement policies that support the shift to sustainable practices and decouple economic growth from resource use.

Sources: [https://sdgs.un.org/goals/goal12](https://sdgs.un.org/goals/goal12)
[https://sdgs.un.org/topics/chemicals-and-waste](https://sdgs.un.org/topics/chemicals-and-waste)

thumbnail_12.png

12.png

12. Responsible consumption and production

Ensure sustainable consumption and production patterns

**Take urgent action to combat climate change and its impacts**

![13..JPG](https://goldilocks-images.s3.eu-west-1.amazonaws.com/13_26b36d59ff.JPG)

The science is clear: our climate is heating rapidly. The average global temperatures have increased by 1.2 degrees Celsius since 1880, particularly in the late 20th century. The concentration of atmospheric CO2, the GHG that contributes more than 2/3 to global warming, is at its highest level ever. The Intergovernmental Panel on Climate Change (IPCC) steadily points out that human activities have warmed the atmosphere, ocean and land, producing widespread and rapid changes in the atmosphere, ocean, cryosphere and biosphere. 

Without transformative action starting now and within this decade to reduce greenhouse gas emissions deeply and rapidly in all sectors, the 1.5°C target will be at risk and with it the lives of more than 3 billion people. 
According to IPCC, warming beyond 1.5 degrees could have irreversible and irreparable consequences. However, effective and equitable adaptation and mitigation actions can significantly reduce vulnerability and contribute to climate resilience. To limit global warming to well below 2, preferably 1.5 degrees Celsius, compared to pre-industrial levels, countries came together to hold themselves accountable under the Paris Agreement. 

Failure to act leads to intensifying heat waves, droughts, flooding, wildfires, sea-level rise, and famines. Emissions should already be decreasing now and will need to be cut almost by half by 2030 - a mere seven years from now. 


To combat climate change and its impacts by 2030, urgent and transformative action is needed to meet the commitments under the Paris Agreement across mitigation and adaptation efforts.

Sources: [https://sdgs.un.org/goals/goal13](https://sdgs.un.org/goals/goal13)
[https://sdgs.un.org/topics/climate-action-synergies](https://sdgs.un.org/topics/climate-action-synergies)

thumbnail_13.png

13.png

13. Climate action

Take urgent action to combat climate change and its impacts

Slow strategies aim to keep materials in use for as long as possible, for example through design for durability and repairability. A more circular economy is also a slower one: materials, components, and products—and even buildings and infrastructure—that we lock in stocks are made to last. This will lower material demand in the long run, in essence also serving to narrow resource flows.

Slow

Cycle strategies aim to cycle and reuse materials at their highest value: they maximise the volume of secondary materials re-entering the economy, ultimately minimising the need for virgin material inputs and therefore also narrowing flows. Of course, virgin materials will always be needed to a degree: all materials degrade and can’t be cycled infinitely, use energy, and require blending with virgin materials to maintain strength and functionality.

Cycle

Engage with the local community where facilities or offices are located

Community collaboration

Designing products that can easily breakdown and degrade in the environment

Design for bio-degradability

Replace energy sources with less impactful alternatives and enact energy efficiency measures

Regenerative energy

Selling parts of modular products that can be exchanged or replaced

Sale of exchangeable parts

Designing to enable multiple uses and lifecycles of a product and its materials

Design for cyclability

Engaging in discussions with government bodies and policymakers to push for regulations that support the circular economy

Advocacy for circular economy policy

Using renewable energy like solar, wind, etc. or renewable fuels like biomass, etc.

Renewable energy, fuels

Designing products of multiple parts that can be easily exchanged

Design for modularity

Providing products through sharing between consumers, customers, etc.

Peer to peer sharing

Transforming waste products into materials and lower value products within other industries

Open loop downcycling

Providing DIY repair kits or spare part programmes for enabling self-repair

Self-repair, spare part service

Engage and guide customers and consumers to ensure circular use of products

Customer / consumer collaboration

Transforming waste products, materials for reuse within the same industry

Closed loop upcycling

Designing to reduce waste during production and use

Design out waste

Allowing customers to alter and modify certain features of the product

Customisation

Facilitate discussions and meetings between internal team members to identify circular opportunities

Dialogue with internal stakeholders

Generating energy from waste through processes such as anaerobic digestion, gasification, incineration, etc.

Generating energy from waste

Use digital, online platforms and technologies that provide insights to track and optimise resource use, strengthen connections between supply chain actors, and enable the implementation of circular models



Incorporate digital technology

While resources are in-use, maintain, repair and upgrade them to maximise their lifetime and give them a second life through take back strategies when applicable

Stretch the lifetime

Industry peers to industry peer collaboration to create joint value and identify synergies

Industry collaboration

Preserving and conserving biological products such as food, forests, etc.

Preservation, conservation

Working together with the community and engaging them in the company operations

Joint product development

Reuse, repurpose, and recycle waste streams within the same industry

Valorise waste streams - closed loop

Replacing freshwater use with rainwater, fogwater, seawater, etc.

Alternative water use

Initiatives with disadvantaged communities, minorities, people distanced from the labour market

Give-back programmes

Processing waste streams into fuels such as biogas, biofuels, pellets, etc.

Processing waste into fuel

Using bio-based materials such as bioplastics, mushroom-based materials, etc.

Alternative bio-based materials and inputs

Using waste materials that have been processed and recycled to produce new products within other industries

Using open loop recycled materials

Employ technologies to gather and analyse data to provide insights on resource use

Data and insights

Designing products so they produce as little waste as possible during production

Design for minimal waste

Takeback and return of products from customers after end-of-use

Takeback programmes

Transforming waste products, materials for reuse within other industries

Open loop upcycling

Upgrade, repair, and maintenance while in-use

Maximise lifetime of products in-use

Enacting measures that optimise water use

Water efficiency

Designing products that are made to last and to ensure longer use

Design for durability

Installing sensors to gather data from products and services to identify, enable and/or implement circular strategies (eg. effective resource use & logistics planning, circular business models & design)

Sensors, monitoring systems

Decentralised services that rely on the power of the crowd or the community

Crowd-based services

Marketplaces or services that enable the second hand sale of products

Second-hand sale, distribution

Engage internally to guide employees and facilitate greater knowledge sharing between internal divisions

Internal collaboration

Collection programmes that process products and parts for reuse or recycling within other industries

Open loop collection

Engage with the government on circular policies and programmes

Government collaboration

Engaging in discussions with customers to educate and raise awareness of the circular economy and explore circular opportunities together

Customer dialogue, marketing 

Integrating circular economy thinking into employee evaluations that are tied to professional compensation

Financial incentives tied to circular economy

 Develop research, structure knowledge, encourage innovation networks and disseminate findings with integrity


Strengthen and advance knowledge

Reuse, repurpose, and recycle waste streams within other industries

Valorise waste streams - open loop

Employ online platforms to connect and improve information sharing between stakeholders

Digital platforms

Using <a href="https://echa.europa.eu/information-on-chemicals" target="_blank">materials that are not toxic or hazardous</a>.

Non-toxic materials and inputs

Integrate principles of circularity into primary, secondary and tertiary curriculum and conduct workplace trainings

 Education and Curriculum

Account for the systems perspective during the design process, to use the right materials, to design for appropriate lifetime and to design for extended future use

Design for the future

Enacting measures that optimise energy use

Energy efficiency

Recover waste energy or generate fuels and energy from waste streams

Energy recovery from waste

Converting fossil fuel based operations to electric

Electrification

Collection programmes that process products and parts for reuse or recycling within the same industry

Closed loop collection

Selling high quality, long-lasting products

Sale of durable, long-lasting goods

Utilise waste streams as a source of secondary resources and recover waste for reuse and recycling

Use waste as a resource

Putting in place purchasing guidelines for procurement departments and evaluating suppliers on circular economy principles

Circular procurement

Key elements of the circular economy

<p>Circu Li-ion, a Luxembourg-based start-up, has developed automated systems for dismantling end-of-life (EoL) lithium-ion batteries from electric vehicles (EVs), battery energy storage systems (BESS), and micromobility devices. This innovation enhances the efficiency, safety, and scalability of battery recycling and upcycling processes, contributing to the circular economy in the energy storage sector.</p>